Electrical Training Aids Teaching Equipment Switching and Control Trainer

The Switching and Control Trainer is not only for practical training of vocational school students, but also is an ideal equipment for primary, intermediate maintenance electrician skills assessment.

The power supply part and components part is separated, the power is divided into three parts, the general power supply part, the control power supply part and the measurement display part; Hang part is based on the actual use of hanging different modules; easy to use.

There are totally 5 modules,  each module can be used independently or combines together. The installation location adjust according to the actual situation,easy to operate, easy to replace, expandable features or development new training; training content selection is typical, practical.

The control circuit and small motor can simulate the electric drive system of all kinds of machinery in the factory, and can meet the skill training requirements of maintenance electricians in terms of installation, commissioning, failure analysis and troubleshooting;

All the components are lead to the terminals, students only need to connect the wiring terminals, is conducive to the protection of components;

The Switching and Control Trainer is Electrical Training Aids. The practical operation of the electrical control circuits listed in the textbooks of "Elementary Maintenance Electrotechnical" and "Intermediate Maintenance Electrotechnical" can enable students to exercise their skills well and improve them.  More Electrical Training Aids  information please visit http://www.dolangeducation.com/electrical-maintenance-skill-training-series/1229.html

Specifition of the equipment 

1,Input voltage: three-phase five-wire 380V ± 10% 50HZ

2, Working environment temperature range : -5 ~ 40 ℃

3, Device capacity:AC<1.5KVA

4, Dimensions: L × W × H = 1810x720x1620mm3

5, General power control, with leakage protection, when the leakage current reaches 30mA, the protection device action

6, The grid voltage instructions with 450V AC voltmeter pointer 3 units.

Servo Motor Control Trainer Vocational Training Equipment

DLCG-YL120 AC servo motor training system learn from the german advanced vocational education concept, to work process-oriented, motor control as the carrier, respectively,for AC servo entry, commonly used electrical tools and instrumentation, basic control of motor installation &maintenance and many others basic skills operation learning ,to achieve the students learning of the motor controland comprehensive understanding,can improve the studentspractical ability. Control circuit for skills training and a small motor can simulate all kinds of machinery factory power drag system, and to meet the training requirement of maintenance of electrical installation, commissioning, fault analysis and troubleshooting skills.

Parameter of training platform
Input power: three-phase five-wire AC380V ± 10% 50Hz
  Working environment: -10 ℃ - 45 ℃, relative humidity <90% RH (25 ℃), altitude <4000M
  Device capacity: <1.5KVA
  Output power: three-phase AC380V ± 10% 50Hz, single-phase AC220V ± 10% 50Hz
             DC24V (2 way)
The total power control has a leakage protection function, when the leakage current of 30mA, the protection device action.
The grid voltage indication is equipped with 450V pointer AC voltmeter 3.
  The overall length of the equipment: 2735mm, where:
  Training platform length: length × width × height: 1700 × 700 × 1750mm
  Ball screw small table: length × width × height: 1035 × 430 × 791mm
  PLC (1214C DC / DC / DC) Parameters:
Input power: DC24V
Type: Thyristor output type

More product information please visit http://www.dolangeducation.com/electrical-maintenance-skill-training-series/1225.html